
Add to Cart
IP67 Waterproof Co Carbon Monoxide Gas Analyzer Industrial Combustion Equipment Gas Detector
Carbon Monoxide Analyzer specifications
Measure range | CO, Carbon Monoxide |
Resolution | 0-500,1000,2000ppm etc |
Response time | ≤30 seconds |
Precsiion | ≤±2%F.S |
Automatically test and calibrate after power-on | Including reset, maximum value (MAX), minimum value (MIN), STEL, TWA value |
Unit | PPM and mg/m³ can be switched |
Data record | Can store 100,000 sets data, the storage interval is adjustable from 5 to 3600 seconds, data can be exported |
Alarm | 95dB buzzer (@30cm), vibration alarm and flashing red LED and alarm status indication on the screen, alarm latched; diagnostic alarm and battery undervoltage alarm, pump block alarm; man down alarm, with early warning and optional real-time remote Bluetooth notification function |
Battery | 3.7V rechargeable lithium battery, battery capacity 2200mA |
Working hours | More than 15 hours in continuous pumping mode |
Charger | Travel charger with DC interface, charging time ≥ 4 hours |
Explosion-proof grade | IECEX/ATEX(II IG Ex ia IIC T4 CNEX:Ex ia IIC T4 Ga |
Certification (EU regulations) | 2004/108/EC(EMC) 1995/5/EC(Radio) 94/9/EC(ATEX) |
Protection grade | IP67 |
Working temperature | -20ºC~+50ºC |
Humidity | 0~90%RH(no condensation) |
Environmental pressure | 86~106Kpa |
1. Astigmatic design is applied to rugged surroundings;
2. Continuously gas concentration and composition colorful LCD real-time display;
3. Rechargeable lithium battery (continuous working period can be 16~18 hours);
4. Concentration units ppm and mg/m3 can be switched
5. Built-in vibration alarm which is applied for noisy environment;
6. Two stage alarm threshold: the low alarm and high alarm point can be adjusted based on actual needs;
7. Simple automatic calibration program and plug-in replaceable sensor;
8. Fully functional self-testing: sensor, integrity of battery and circuit, acoustic & visual & vibration three-stage alarm;
9. Small figure and light weight;
10. Password protection capability: only the authorized user can modify the preset parameter.
Company Information
We are a production-oriented high-tech enterprise focusing on R & D,R & D department as the core department,Responsible for the core technology design, function upgrading and development, equipment installation technical support, maintenance and testing of the company's products, currently composed of 6 senior engineers.
Precautions
1. It is strictly forbidden to use in a high temperature and high pressure environment. If the humidity of the environment is high, a filter and dehumidification device must be installed
2. The user is not allowed to repair or replace parts without authorization
3. Man-made damage is not covered by the warranty
4. It is not allowed to change the components or structures that affect the explosion-proof performance at will, so as not to affect the explosion-proof performance
5. The battery must be replaced with the same type of battery and carried out in a safe place