Shenzhen YuanTe Technology Co., Ltd. (Safegas)
Shenzhen YuanTe Technology Co., Ltd(Sagegas) Specialized in gas detection for 16 years
Add to Cart
H2S Hydrogen Sulfide Gas Leak Detector H2S Monitor H2S Sensor With Alarm ATEX CE
Explosion-proof wall-mounted H2S Hydrogen Sulfide Gas detector are specially developed for garbage station, wastewater treatment, Air quality, coal mine, etc different environments. Tt has wide measuring range, high precision, good linearity, universal model, convenient use, easy installation and long transmission distance. It is widely used in industrial, agricultural, scientific research and other fields.
To make sure safety or air emission quality, we need to test H2S Hydrogen Sulfide leakage. If you want to test H2S Hydrogen Sulfide leakage, we suggest you use measure range 0-100ppm, resolution is 0.1ppm; If you want to test H2S Hydrogen Sulfide in air quality, we suggest you use measure range 0-10ppm, resolution is 0.001ppm. Besides, our wall-mounted H2S Hydrogen Sulfide Gas detector can be with controller panel, it can be connected with detectors, the readings will show on the panel by 4-20mA or RS485 signal output.
Applications for wall-mounted H2S Hydrogen Sulfide Gas detector
Garbage station, Wastewater treatment, Air quality, Chemical industry, food factory, software engineering, environmental protection, animal husbandry, mining, power engineering, etc.
At present, we have cooperated with Coca-Cola Company, Nestle, State Grid Administration, Samsung, HuaWei, etc for wall-mounted H2S Hydrogen Sulfide Gas detector.
Wall-mounted H2S Hydrogen Sulfide Gas detector Specification
| Gas detected | H2S Hydrogen Sulfide | ||
| Detection principle | Electrochemistry, sensor and ic are imported from US/UK | ||
| Install method | Wall-mounted, piping type, flow-type (according to the detected environment) | ||
| Measure range | 0-10ppm, 0-20ppm, 0-50ppm, 0-100ppm, 0-200ppm | ||
| Resolution | 0.001ppm, 0.01ppm, 0.1ppm | ||
| Precision | ≤± 2-3% FS for normal sensor, ≤± 1% FS for high precision sensor | ||
| Signal output | 4-20mA, 0-5V, RS485, relay(optional) | ||
| Response time | ≤10S | Recovery time | ≤10S |
| Repeatability | ≤±1% | Linearity error | ≤±1% |
| Zero shift | ≤±1%(FS/year) | Display | High-light nixie tube display |
| Connection mode | G1/2 external thread explosion-proof flexible pipe | Unit | %VOL |
| Temperature | -20 to 50°C | Humidity | 0-95%RH |
| Explosion-proof | II 2G Ex db IIC T6 Gb IP65 | Degree of protection | IP65 |
| Alarm | Sound, light | Operating time | 24H |
| Dimensions | 180*150*90mm | Weight | ≤2kg |
Wall-mounted H2S Hydrogen Sulfide Advantages:
Use imported US/UK original sensors to keep the high precision and fast response.
Sandard equipped with three-wire system 4-20mA, RS485 and Inner Relay(24Vdc 50mA) output, external AC relay is optional;
Infrared ray control function, which can non-contacted control the detector. Being compatible with all kinds of controlled alarms, PLC, DCS and other control system.
Explosion-proof design, fast, reliable and stable.
Explosion-proof grade: II 2G Ex db IIC T6 Gb IP65
With self-calibration function and three standard keys will be used to realize on-site maintenance.
Wall-mounted H2S Hydrogen Sulfide Features:
Monitor the H2S Hydrogen Sulfide gas concentration in environment or pipeline and alarm.
With self-calibration and zero calibration function to make sure the detection more accurate and reliable.
With temperature compensation, this is able to realize gas concentration compensation under conditions of different temperatures.
Two-stage alarm with sound and light, alarm point is settable.
Infrared ray controller can remote control alarm point settings,
zero calibration, and address modification.
Can output one or two on-off signals, can drive ventilator or
solenoid valve and other external devices.
Working Voltage:12-36V DC
Case:die-cast aluminum + stainless steel (alarm light)
Factory information
Shenzhen YuanTe is gathered by a group of industry experts who are experienced in gas detectors R&D, manufacturing and investment. Every year, 5% of Shenzhen YuanTe’s income will be invested as R&D fund. To select out these new product, new technology and new services which will meet market demand is the most important task for R&D team.
For manufacturing, we have independent production workshop, modern production equipment, aging room, calibration room and professional staff.
For marketing, we implement flexible and competitive price and diversified sales strategy. We penetrate the market by various methods such as OEM, ODM, agent and direct selling, and ensure profit of every partner.
For service, we provide 24h/day service to users, rapid in response, technical guidance in place, convenience in repair and maintenance. At present, detectors are with ATEX CE EMC international certifications, Company has got ISO9001-2015 Quality management system certificate.
Certifications:
CE, ATEX, CNEX, ISO9001
Contact Information
Celia Wu
Mobile/WhatsApp/Wechat: +86 15889417475
Email: sales04@szyuante.com